But it does help to get the thread between the discs when you have the foot up as you thread the machine. ThatвЂ™s why you get lots of loops when you try to sew with the presser foot up. When your presser foot is up, the tension discs are open and there is no tension on the top thread. If it doesnвЂ™t, then the machine wonвЂ™t be able to sew properly. So make sure the thread sits correctly between the tension discs when youвЂ™re threading your machine. Top thread tension is controlled by a dial on the machineвЂ™s thread path. The less thread, then the tighter the stitch. The more thread in the stitch, then the looser the stitch. By thread tension, we mean the amount of thread that can pass through the machine to create the stitch. If everything listed above fails, consider getting your sewing machine for a repair, or get a new simple model from our list here: /beginner-sewing-machines/ We have handpicked all models featured there.Probably the most common sewing problem is getting correct sewing machine tension.

It may cost more than the lower quality thread, but it will ensure that your work is seamless and that the machine performs at its best while you are working on your next project. Make sure you invest in some good quality thread of the type recommended by the manufacturer. Also, bad quality thread is prone to breaking and knotting which too will hinder your sewing machineвЂ™s performance and will slow down and even ruin your project. Thread of a lower quality can cause the shredding of lint which can get stuck in the mechanics of your machine and cause it to get jammed. Adjust them properly before returning to your project.Дo not underestimate the quality of the thread you use for your sewing projects, because often lower quality thread can cause a number of bothersome problems for your machine and for your project. Another useful thing to try is to ensure that the presser foot is not too low above the fed dogs which is causing the problems with the fabric moving freely during the sewing process. Also, make sure that they are lifted up in a raised position allowing for a proper grip of the fabric. Stop work, lift the presser foot and thoroughly clean the fee dogs from any debris. The reason for the problem could be lint, dust and other debris getting stuck in their mechanism. The feed dogs are not functioning properlyДЄnother relatively common reason for the malfunctioning of sewing machines is when the small teeth located underneath the needle and presser foot which are responsible for pulling the fabric through during the sewing process, also known as feed dogs, are not working properly. Make sure you are using the proper type and size needle for the machine and for the particular project too, because sometimes this can be the underlying cause the annoying jamming as well.

Stop work and carefully inspect your needle for any deformities or breakage, and if you see any вЂ“ replace it with a new one. Often, your sewing machine will suddenly stop working due to a bent or broken needle which stops the thread from going through the fabric. To prevent further such occurrences, schedule monthly cleaning and oiling of your machine and if you sew on a daily basis, you probably would want to perform the cleaning and maintenance even more often.

Use canned air for blowing out any residues from the bobbin area. Plus, make sure that you perform regular oiling of the metal parts of your machine for a seamless performance. Use a small brush or blow out any stuck lint, dust or others. If this type of jamming occurs, turn the stitching machine off, go ahead and un-thread it and perform a thorough cleaning of the entire machine, especially its working mechanisms. This is why you need to periodically take the time to clean out your machine from any dust or gunk stuck during your work on your various sewing projects. This can occur due to dust, lint or other debris getting stuck inside the machine. Your machine is clogged at some point or place This simple problem will case the machine to get jammed due to the insufficient tension necessary for pulling up the thread through the fabric you are sewing.ДЄll you need to do is go ahead, lift the presser foot and re-thread your needle in accordance to the instructions of the manufacturer. However certain you are that the problem with the machine is most likely due to a huge tangled mess of thread in the bobbin underneath the fabric, the most common reason for the jamming is usually the lack of sufficient tension in the upper thread.

1.4 The feed dogs are not functioning properlyДҐ ReasonsВ Why Your Sewing Machine Keeps Jamming:.

1.2 Your machine is clogged at some point or place.

1.1 Lack of tension on the upper thread.

1 5 ReasonsВ Why Your Sewing Machine Keeps Jamming:.

Kenmore sewing machine troubleshooting